|
|
Can be set between 5 to 40 degrees to give maximum flexibility on conservatory design and configuration whilst reducing stockholding. The glazing carrier rotates in the ridge to the required angle and is locked in position at the factory. This means there is no assembly on site. The ridge is supplied to site pre-assembled and ready to use.
|
|
|
Grooves on the main ridge section indicate 5 degree increments to simplify assembly in the factory.
|
Locates the ridge and helps to align the roof saving time and effort.
|
The pre-set pitch ridge is suitable for standard 20, 25 and 30 degree roofs. Delivers ultimate fabrication and assembly speeds and cost efficiency for 'standard module' roofs.
|
|
|
Site map